Types of blow molding

Engineering

STRIKE MOLDING:

Plastic material processing technique in which air is offered in warmed plastic until it fills a mold to produce a necessary hollow condition is called Whack Molding. Cup bottles also formed at this time technique.

PROCEDURE OF BLOW MOLDING:

The basic method of Hit Molding includes:

• Melting the thermosoftening plastic resin by simply extruder.
• Forming smelted resin in to the parison.
• The parison is placed in the mold. Air is filled with air plastic that push to the outside against the tooth cavity wall.
• The created is then cooled down ejected from your mold.

TYPES OF BLOW MOLDING:

Next are the key types of Blow Molding.

Shot Blow Molding.

Extrusion Blow Molding.

Treatment Stretch Strike

Molding.

1 . TREATMENT MOLDING:

Through this type of Strike Molding. We required a blow or perhaps core rod throughout the method. Process starts with the injections of parison in to a divided mold tooth cavity around the fly fishing rod. The parison that is to be shaped appears like a evaluation tube. The parison is usually transferred by core fly fishing rod to the hit mold equipment. where atmosphere is forced to create the desire shape. The fishing rod then transfers and extrudes the finished product from the machine.

2 . EXTRUSION MOLDING:

Extrusion molding could be classified since Continuous Extrusion Blow molding and Intermittent

Extrusion Blow Molding.

CONTINUOUS EXTRUSION BLOW MOLDING:

In ongoing extrusion strike molding, a parison will be constantly given into the form and each contact form will be cut off with a knife as it forms.

SPORADIC EXTRUSION WHACK MOLDING:

Intermittent extrusion whack molding expectorates each fresh plastic from the metal mildew when it is cooled down and the parison is provided into the mould only after the preceding parison is removed.

Extrusion blow molds are normally cheaper than injections blow molds and can be formed quickly because compare to different ones.

Positive aspects include financial savings on tooling and shorter production time while down sides usually include lesser power over wall thickness and increased amount of scrap materials.

3. INJECTION EXTEND MOLDING:

Injection stretch hit molding is the combine form of injection and molding and blow molding processes. Through this process sound preform is done by molded plastic to create a threaded bottle neck.

After the preform cools down it is after that fed in to stretch whack mold. An infrared heater is used to reheat the preform and after that blown in a plastic bottle of wine with required compressed atmosphere.

ELEMENTS AFFECTING HIT MOLDING:

• Parison attributes: Size, form, straightness, wall thickness, physical strength.
• Inflation pressure: pressure will probably be set in line with the process. In this article, stretch strike molding pressure is less required.
• Form design

ADVANTAGES OF WHACK MOLDING:

• Low tooling cost
• Fast production price.
• Capability to mold complicated.
• Very little scrap made.
• Recycling.
• Huge hollow parts.

DISADVANTAGES OF BLOW MOLDING:

• Just for hollow parts.
• Problem may be viewed.
• Solid parts cannot be manufactured.

Tweet